trunk/gcc135/target-check-rtl-i386-watcom.txt results

File details

./trunk/gcc135/target-check-rtl-i386-watcom.txt 2025-07-31-02:53

Used binaries

/home/muller/bin/i386-watcom-wasm   

Binaries version

> uname -a
Linux cfarm135 4.18.0-80.7.2.el7.ppc64le #1 SMP Thu Sep 12 15:45:05 UTC 2019 ppc64le ppc64le ppc64le GNU/Linux
> sha256sum: fbda31edf55970ac61c20eff235e68797cf8603ca452b23e82d2fb8b7765a715  /home/muller/bin/i386-watcom-wasm
> /home/muller/bin/i386-watcom-wasm -V: Open Watcom Assembler Version 2.0 beta Sep 30 2020 10:51:02
Copyright (c) 2002-2020 The Open Watcom Contributors. All Rights Reserved.
Portions Copyright (c) 1992-2002 Sybase, Inc. All Rights Reserved.
Source code is available under the Sybase Open Watcom Public License.
See http://www.openwatcom.org/ for details.
Unknown option -V. Use /? for list of options.

Full file content

 
### /home/muller/bin/gmake -d -j 16 -r -C rtl all CPU_TARGET=i386 OS_TARGET=watcom FPC=/home/muller/pas/fpc-3.3.1/bin/ppc386 BINUTILSPREFIX=i386-watcom- OPT="-n -vx " 
GNU Make 4.4.1
Built for powerpc64le-unknown-linux-gnu
Copyright (C) 1988-2023 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later 
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Reading makefiles...
Reading makefile 'Makefile'...
gmake: Entering directory '/run/user/61083/pas/trunk/rtl'
Using jobserver controller fifo:/tmp/GMfifo112290
Updating makefiles....
 Considering target file 'Makefile'.
  Looking for an implicit rule for 'Makefile'.
  No implicit rule found for 'Makefile'.
 Finished prerequisites of target file 'Makefile'.
 No need to remake target 'Makefile'.
Updating goal targets....
Considering target file 'all'.
 File 'all' does not exist.
 Considering target file 'watcom_all'.
  File 'watcom_all' does not exist.
 Finished prerequisites of target file 'watcom_all'.
 Must remake target 'watcom_all'.
Need a job token; we don't have children
Makefile:2976: update target 'watcom_all' due to: target is .PHONY
/home/muller/bin/gmake -C watcom all
Putting child 0x1bde2830 (watcom_all) PID 112300 on the chain.
Live child 0x1bde2830 (watcom_all) PID 112300 
GNU Make 4.4.1
Built for powerpc64le-unknown-linux-gnu
Copyright (C) 1988-2023 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later 
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Reading makefiles...
Reading makefile 'Makefile'...
gmake[1]: Entering directory '/run/user/61083/pas/trunk/rtl/watcom'
Reading makefile '../inc/makefile.inc' (search path) (no ~ expansion)...
Reading makefile '../i386/makefile.cpu' (search path) (no ~ expansion)...
Using jobserver controller fifo:/tmp/GMfifo112290
Updating makefiles....
 Considering target file 'Makefile'.
  Looking for an implicit rule for 'Makefile'.
  No implicit rule found for 'Makefile'.
 Finished prerequisites of target file 'Makefile'.
 No need to remake target 'Makefile'.
 Considering target file '../inc/makefile.inc'.
  Looking for an implicit rule for '../inc/makefile.inc'.
  No implicit rule found for '../inc/makefile.inc'.
 Finished prerequisites of target file '../inc/makefile.inc'.
 No need to remake target '../inc/makefile.inc'.
 Considering target file '../i386/makefile.cpu'.
  Looking for an implicit rule for '../i386/makefile.cpu'.
  No implicit rule found for '../i386/makefile.cpu'.
 Finished prerequisites of target file '../i386/makefile.cpu'.
 No need to remake target '../i386/makefile.cpu'.
Updating goal targets....
Considering target file 'all'.
 File 'all' does not exist.
 Considering target file 'fpc_all'.
  File 'fpc_all' does not exist.
  Considering target file 'fpcmade.watcom'.
   File 'fpcmade.watcom' does not exist.
   Considering target file 'fpc_loaders'.
    File 'fpc_loaders' does not exist.
    Considering target file '/run/user/61083/pas/trunk/rtl/units/watcom'.
     File '/run/user/61083/pas/trunk/rtl/units/watcom' does not exist.
    Finished prerequisites of target file '/run/user/61083/pas/trunk/rtl/units/watcom'.
    Must remake target '/run/user/61083/pas/trunk/rtl/units/watcom'.
Need a job token; we don't have children
Makefile:1858: update target '/run/user/61083/pas/trunk/rtl/units/watcom' due to: target does not exist
/usr/bin/mkdir -p /run/user/61083/pas/trunk/rtl/units/watcom
Putting child 0x48cff520 (/run/user/61083/pas/trunk/rtl/units/watcom) PID 112303 on the chain.
Live child 0x48cff520 (/run/user/61083/pas/trunk/rtl/units/watcom) PID 112303 
Reaping winning child 0x48cff520 PID 112303 
Removing child 0x48cff520 PID 112303 from chain.
    Successfully remade target file '/run/user/61083/pas/trunk/rtl/units/watcom'.
Directory /run/user/61083/pas/trunk/rtl/units/watcom cache invalidated (count 3 != command 4)
    Considering target file 'prt0.obj'.
     File 'prt0.obj' does not exist.
     Considering target file 'prt0.as'.
      Looking for an implicit rule for 'prt0.as'.
      No implicit rule found for 'prt0.as'.
     Finished prerequisites of target file 'prt0.as'.
     No need to remake target 'prt0.as'.
    Finished prerequisites of target file 'prt0.obj'.
    Must remake target 'prt0.obj'.
Need a job token; we don't have children
Makefile:2985: update target 'prt0.obj' due to: target does not exist
wasm prt0.as -fo=prt0.obj -bt=dos -5s -fp5 -ms -zq
Putting child 0x48d34660 (prt0.obj) PID 112304 on the chain.
Live child 0x48d34660 (prt0.obj) PID 112304 
Reaping winning child 0x48d34660 PID 112304 
/usr/bin/cp -fp prt0.obj /run/user/61083/pas/trunk/rtl/units/watcom/prt0.obj
Live child 0x48d34660 (prt0.obj) PID 112305 
Reaping winning child 0x48d34660 PID 112305 
Removing child 0x48d34660 PID 112305 from chain.
    Successfully remade target file 'prt0.obj'.
   Finished prerequisites of target file 'fpc_loaders'.
   Must remake target 'fpc_loaders'.
   Successfully remade target file 'fpc_loaders'.
   Considering target file 'fpc_units'.
    File 'fpc_units' does not exist.
    Pruning file '/run/user/61083/pas/trunk/rtl/units/watcom'.
Directory /run/user/61083/pas/trunk/rtl/units/watcom cache invalidated (count 4 != command 6)
    Considering target file 'system.ppu'.
     File 'system.ppu' does not exist.
     Considering target file 'system.pp'.
      Looking for an implicit rule for 'system.pp'.
      No implicit rule found for 'system.pp'.
     Finished prerequisites of target file 'system.pp'.
     No need to remake target 'system.pp'.
    Finished prerequisites of target file 'system.ppu'.
    Must remake target 'system.ppu'.
Need a job token; we don't have children
Makefile:2297: update target 'system.ppu' due to: target does not exist
/home/muller/pas/fpc-3.3.1/bin/ppc386 -dNO_EXCEPTIONS_IN_SYSTEM -Twatcom -Pi386 -XPi386-watcom- -Ur -Xs -O2 -n -Fi../inc -Fi../i386 -FE. -FU/run/user/61083/pas/trunk/rtl/units/watcom -n -vx -di386 -dRELEASE  -Us -Sg system.pp
Putting child 0x48d34e30 (system.ppu) PID 112306 on the chain.
Live child 0x48d34e30 (system.ppu) PID 112306 
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(189): Warning! W599: alignment request greater than segment alignment
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(215): Warning! W599: alignment request greater than segment alignment
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(255): Warning! W599: alignment request greater than segment alignment
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(282): Warning! W599: alignment request greater than segment alignment
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(379): Error! E002: Invalid instruction with current CPU setting
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(380): Error! E002: Invalid instruction with current CPU setting
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(381): Error! E065: Operator is expected
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(382): Error! E065: Operator is expected
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(393): Error! E002: Invalid instruction with current CPU setting
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(394): Error! E002: Invalid instruction with current CPU setting
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(402): Error! E065: Operator is expected
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(405): Error! E065: Operator is expected
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(413): Warning! W599: alignment request greater than segment alignment
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(415): Error! E065: Operator is expected
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(416): Error! E065: Operator is expected
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(417): Error! E065: Operator is expected
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(418): Error! E065: Operator is expected
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(423): Error! E065: Operator is expected
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(424): Error! E065: Operator is expected
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(426): Error! E065: Operator is expected
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(428): Error! E065: Operator is expected
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(430): Warning! W599: alignment request greater than segment alignment
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(432): Error! E002: Invalid instruction with current CPU setting
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(433): Error! E002: Invalid instruction with current CPU setting
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(434): Error! E002: Invalid instruction with current CPU setting
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(435): Error! E002: Invalid instruction with current CPU setting
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(458): Warning! W599: alignment request greater than segment alignment
/run/user/61083/pas/trunk/rtl/units/watcom/system.asm(521):  574: Too many errors
Executing "/home/muller/bin/i386-watcom-wasm" with command line "/run/user/61083/pas/trunk/rtl/units/watcom/system.asm  -6s -fp6 -ms -zq -Fo=/run/user/61083/pas/trunk/rtl/units/watcom/system.obj"
system.pp(796) Error: Error while assembling exitcode 1
system.pp(796) Fatal: There were 2 errors compiling module, stopping
Fatal: Compilation aborted
Reaping losing child 0x48d34e30 PID 112306 
gmake[1]: *** [Makefile:2297: system.ppu] Error 1
Removing child 0x48d34e30 PID 112306 from chain.
gmake[1]: Leaving directory '/run/user/61083/pas/trunk/rtl/watcom'
Reaping losing child 0x1bde2830 PID 112300 
gmake: *** [Makefile:2976: watcom_all] Error 2
Removing child 0x1bde2830 PID 112300 from chain.
Acquired all 15 jobserver tokens.
gmake: Leaving directory '/run/user/61083/pas/trunk/rtl'
Error line found in /home/muller/logs/trunk/check-targets/target-check-rtl-i386-watcom.txt: Target system.ppu Error 1 in line 2297
Target watcom_all Error 2 in line 2976
Listing directory rtl/units/watcom:
rtl/units/watcom/system.asm
rtl/units/watcom/prt0.obj